Clog Care

We stand by the craftsmanship of our clogs and we want you to love and enjoy them for years to come.  

Though it doesn't happen often, breaks can happen with any material. If you find that your clogs have damaged, please feel free to reach out to us with a photo of the issue and we'll assist you. hello@bryrstudio.com

Every pair of Bryr clogs are handmade, start to finish, under one roof. We use natural materials and each pair has natural variations in color, wood grain and construction. We do not consider these material variations errors, but rather the natural wabi sabi of organic materials. With the proper care, you should be able to enjoy your clogs for years. Please see below for tips on keeping your clogs in great condition.
You can read more about our process here.

 Each pair of clogs wears differently from person to person. The environment, gait of the wearer, and frequency of use will all have an effect on the the clogs wear. Scratches and scuffs, water damage and outsole replacements are normal wear and tear.

Bryr Studio does not offer in house repair services. For all treatments, we recommend going to a shoe repair store for supplies and repairs.

Support your local cobbler!

Storing your clogs

We highly recommend storing your clogs out of the sun, either in a closet or in a muslin bag. Different colors are light sensitive in different ways, and storing them away from the sun will keep your color brighter for longer. 

Clog care:

Our bases are hand carved from a solid block of lindenwood. We chose this wood because it’s strong, beautiful and long lasting. As a natural material, we ask that you please treat your clogs with some care. They are not made of plastic and aren't indestructible. 

We do not accept returns on clogs that have been chipped. Our clog bases are made of solid wood, and, if struck against a hard surface with sufficient force, will chip. This is the nature of wooden bases, not a material defect. Your local cobbler can fix chips and cracks easily to keep your clogs in great shape for years. 

If the outsole rubber falls off, please do not wear your clogs. As wood is soft, it will wear down quickly and become irreparable. Please take your clogs to your local cobbler. Any cobbler will be able to replace the outsole rubber. 

Cleaning the bases:

Our clogs with a natural wax which is what gives them a beautiful, lightly polished look that's not shiny. You’re welcome to re-wax with any all uncolored, natural wood wax, beeswax or wood sealer. To clearn them, first use a damp cloth and mild detergent. Make sure you let the wood dry fully before adding the wax. Follow the directions on the wax for best results.

Our leathers

All of leathers are manufactured in the United States by heritage tanneries that follow stritch EPA environmental standards. They are the highest quality, most durable. And, in our humble opinion, absolutely gorgeous.


Full Grain leather:

You can polish full grain leather like any leather shoes, but we recommend using natural materials when possible to keep the leather in great shape for years. It's always a good idea to test a small patch before application of any chemical protector.

Using shoe polish will extend the life of your shoes and may be a good choice if you live in a rainy climate. 

While we wouldn't recommend wearing your clogs in a downpour, you'll be just fine if you happen to get stuck. As our clogs are made of leather, stuffing them with newspaper when you're back on dry land will help maintain the shape. Leather is malleable when wet. 


Nubuck:

Nubuck has a buttery tender that's nice and soft from the get go. And, because it’s a buffed, full grain leather, it’s far more durable than suede.

A number of our nubucks are oiled. Some color transfer may occur on surfaces with these colors, so please be mindful when packaging and storing your clogs. We find using separate shoe bags or sectioning them off during travel is helpful. 

Depending on the climate you live in and the amount you expect to wear your clogs, a nubuck protectant spray can be used.

For surface dirt and dust, use an all-natural horsehair brush and buff the dirt away.

If you get a stain on the nubuck, we suggest taking them to your local cobbler to better understand your options.

While we wouldn't recommend wearing your clogs in a downpour, you'll be just fine if you happen to get stuck. As our clogs are made of leather, stuffing them with newspaper when you're back on dry land will help maintain the shape. Leather is malleable when wet. 

Metallics:

Our metallics are some of our favorite - they're rich and sturdy as our tannery places our metallic film over the nubuck. Metallics can be treated similarly to the leather, however, due to their nature there may be some rippling. This is something that should ease with wear. 

Metallics are to be treated slightly more delicately as the film can rub off with contract. We recommend packing these separately during travel and being mindful during wear.  

 

Bryr Studio reserves the right to determine if the damage is due to craftsmanship or to normal wear and tear. We will issue replacements at our discretion.